Vocality V200 User Manual page 103

Vocality User Manual
User Manual for V200
Valid for V08_08.02 or V08_48.02
(p/n VI68723A) at both ends of the link. (When using the serial data card, the four-way
serial data cable p/n VI68231A is also required.) It works for the P400 modem when
fitted with the P1448 interface, with the cable p/n VI68723B/P1448, to operate the
interface in 'Direct' mode. The standard cable should be used with other modems.
The configuration concept is to use one unique clock in the system as generated by
Modem 0 (connected to the V200 with Node ID '0'), with all other clocks derived from
this:
Figure 5-60 Satellite modem configuration concept
In this example, port 1 on slot 5 is used on both units.
The System settings for your V200 units are as follows:
Page 93 of 114