Accessories; Opening The Processing Chamber Door During The Machining Process; Wireless Phone Interference With Equipment - Dentsply Sirona CEREC MC Operating Instructions Manual

Dentsply Sirona
Operating Instructions CEREC MC / MC X
63 98 643 D3439
D3439.201.07.11.02 01.2018

4.2 Opening the processing chamber door during the machining process

4.1.4

Accessories

In order to ensure product safety, this device may be operated only with
original Dentsply Sirona accessories or third-party accessories
expressly approved by Dentsply Sirona. In particular, only the power
cable also supplied or the corresponding original spare part may be
used with the unit. The user is responsible for any damage resulting
from the use of non-approved accessories.
Opening the processing chamber door during
4.2
the machining process
CAUTION
Instruments that continue to run
When the processing chamber door is opened during the machining
process, the instruments could continue to run for a short time.
➢ Be careful not to touch the instruments with your hand or any
other object during this time.
➢ Avoid opening the processing chamber door while the milling and
grinding unit is in operation.
➢ Before you open the processing chamber door, end any actions
that are running by pressing the "Stop" button on the milling and
grinding unit or in the application software.
4.3

Wireless phone interference with equipment

The use of mobile wireless phones in practice or hospital environments
must be prohibited to ensure safe operation of the unit.
4 Safety
11