Dentsply Sirona - Dentsply Sirona CEREC MC Operating Instructions Manual

Dentsply Sirona

Operating Instructions CEREC MC / MC X
63 98 643 D3439
D3439.201.07.11.02 01.2018
5. Wait for a short time until the filter insert is completely soaked; then
add an appropriate amount of water.
6. Close the water tank by tightening the tank cap clockwise by hand.
Do not use the tank cap opener for this.
7. Push the water tank back into the housing.
8. Switch the unit on (see Switching the unit ON and OFF [→ 33]).
9. Switch the pump on (press the "Pump" button) to fill the water
circuit.
10. Fill the water tank up again until the filter insert is completely
immersed (up to the bottom edge of the cap thread).
5 Installation and startup
5.4 Commissioning
31