Dentsply Sirona CEREC MC Operating Instructions Manual page 25

Dentsply Sirona
Operating Instructions CEREC MC / MC X
63 98 643 D3439
D3439.201.07.11.02 01.2018
5.4.7.4.4 Automatic mode
ü The interface cable is connected.
➢ Set the on/off switch to the position Auto.
Note on the automatic mode:
The processing machine monitors the correct socket (interface cable
and suction tube) and the operation of the suction system during the
running processes.
5.4.7.4.5 Setting the suction power
Use the control dial (A) to set the suction power.
➢ Recommendation: Set the suction power to the minimum (min). To
increase the service life of the filter bags, you can increase the
suction power to the maximum suction power (max).
NOTE
We recommended replacing the filter bag for the CEREC suction
device after approx. 120 restoration units. This number may differ
depending on the amount of zirconium oxide materials milled and
suctioned.
5 Installation and startup
5.4 Commissioning
25