Standard Accessories; Instruments; Calibration Pins - Dentsply Sirona CEREC MC Operating Instructions Manual

Dentsply Sirona
Operating Instructions CEREC MC / MC X
63 98 643 D3439
D3439.201.07.11.02 01.2018
5.4.2

Standard accessories

5.4.2.1

Instruments

The following instruments are available for milling and grinding
purposes. When replacing instruments, ensure the permitted instrument
combinations are used (see "Permitted instrument combinations
[→ 40]").
5.4.2.2

Calibration pins

The calibration pins are used when calibrating the instrument sets (see
"Calibrating the unit [→ 36]").
5 Installation and startup
5.4 Commissioning
17