Accessories And Consumables; Opening The Processing Chamber Door During The Machining Process; Electrostatic Charge; Esd Warning Labels - Dentsply Sirona CEREC Primemill Operating Instructions Manual

Dentsply Sirona
Operating Instructions CEREC Primemill
ESD warning label
67 19 681 D3439
D3439.201.01.01.02 09.2019

4.2 Opening the processing chamber door during the machining process

4.1.4

Accessories and consumables

In order to ensure reliable, high-quality results, product safety, and
durability, our range of CEREC Primemill production units must only be
operated with original accessories and consumables from Dentsply
Sirona or approved accessories and consumables from third-party
suppliers.
In particular, only the power cable also supplied or the corresponding
original spare part may be used with the unit. The user is responsible
for any damage resulting from the use of nonapproved accessories and
consumables.
Approved accessories and consumables also include grinding/milling
instruments, blocks, and coolants. The current selection of approved
blocks and corresponding grinding/milling instruments can be found in
the latest software as well as in the "Bur tables for the CEREC milling
and grinding units" in the downloads area at:
https://my.cerec.com
These lists are updated from time to time.
Opening the processing chamber door during
4.2
the machining process
CAUTION
Instruments that continue to run
When the processing chamber door is opened during the machining
process, the instruments could continue to run for a short time
(approx. 2–3 seconds).
➢ Be careful not to touch the instruments with your hand or any
other object during this time.
➢ Avoid opening the processing chamber door while the milling and
production unit is in operation.
➢ Before you open the processing chamber door, end any actions
that are running by pressing the "Stop" button on the production
unit touch display or in the application software.

Electrostatic charge

4.3
4.3.1

ESD warning labels

CAUTION
Risk of injury or damage to components from electrostatic discharge
For electrical components labeled with an ESD warning label,
observe the following instructions.
➢ Apply the ESD protective measures.
➢ Do not touch connector pins or sockets without applying ESD
protective measures first.
➢ Do not establish any connections between these connectors
without applying ESD protective measures first.
4 Safety
13