Consumable - Dentsply Sirona CEREC MC Operating Instructions Manual

9 Consumable

Grinding instruments
Left-hand side
Step Bur 12 S (6x)
Step Bur 12 (6x)
Cylinder Bur 12 EF (6x)*
* Only with 4-motor milling/grinding units.
Step Bur 20 (6x)
Milling instruments**
Left-hand side
Shaper 25 (3x) – dry milling***
Shaper 25 RZ (3x) – wet milling
* Milling possible: only with milling/grinding machines from the following serial numbers: inLab MC XL 129001,
CEREC MC XL 129001, CEREC MC XL Premium Package 302001, CEREC MC X 231001 or replacement of the
left motor on 2-motor machines or of the left motor in the motor set 1 on 4-motor machines.
*** Requires CEREC milling/grinding unit with dry milling configuration and CEREC suction.
REF Description
58 09 640 DENTATEC 1000 ml
63 87 067 Filters MC/MC X (1x)
64 29 950 Filters MC/MCX (pack of 6)
66
9
Consumable
REF
62 40 167 62 40 159
62 60 025
65 35 186 65 35 178
62 59 597 62 59 589
REF
62 99 395 62 99 387
64 33 440
Operating Instructions CEREC MC / MC X
Right-hand side
Cyl. Pointed Bur 12 S (6x)
Cylinder Pointed Bur 12 EF (6x)*
Cyl. Pointed Bur 20 (6x)
Right-hand side
Finisher 10 (3x) – dry and wet milling
Illustration
D3439.201.07.11.02 01.2018
Dentsply Sirona
63 98 643 D3439