Label For La37 - Trunnion Mounting - Linak TECHLINE LA37 User Manual

Label for LA37 - Trunnion mounted
Fig. 1 (customer specific item)
1. Type.:
371CXX+1H700325
Describes the basic functionality of the product
2. Item no.:
370002-00
Sales and ordering code
3. Prod. Date.:
YYYY.MM.DD
Production date describes when the product has been produced. This date is the reference for warranty claims
4. Max Load.: Push/Pull See table IP66
Refers to the scheme at the bottom of the label that describes the maximum load that the product can be
exposed to in compression and tension. This line also contains a reference to the product's IP protection
degree
5. Power Rate.:
36VDC / Max. Amp See Table
Input voltage for the product and maximum current consumption which can be seen in the scheme at the
bottom of the label
6. Duty Cycle.:
5%, Max. 1 min. /19 min.
The duty cycle defines the maximum period during operation without interruption. After operation, a pause
must be observed. It is important that the operator follows the instructions of the duty cycle; otherwise, a
possible overload may result in reduced product life/errors
7.
W/0# 1234567-0001
The LINAK work order followed by a unique sequential identification number
Page 71 of 80