CyberData 011214 Operation Manual page 52

2. On the Configure Security Code page, you may enter values for the parameters indicated in
Web Page Item
Security Configuration
Name
Code
Valid From
Valid To
Blacklist
Operations Guide
Table 2-12.
Table 2-13. Security Code Page Parameters
Installing the SIP Outdoor Intercom with Keypad
Description
Enter name.
Enter a security code, maximum 8 digits, must be distinct.
See Section 2.4.7.2, "The "Valid From" and "Valid To"
Settings".
See Section 2.4.7.2, "The "Valid From" and "Valid To"
Settings".
Blacklist is used to deny entry to the specified security
code. Entering a blacklisted code will trigger the buzzer,
and can trigger a call to an extension or a multicast of a
pre-recorded message.
Saves the changes of the security configuration.
Cancels the changes of the security configuration.
931562B
Intercom Setup
CyberData Corporation
45