CyberData 011214 Operation Manual page 50

Web Page Item
Blacklist Actions
Play Message to SIP Extension
Dial Out SIP Extension
Dial Out SIP ID
Multicast Audio Message
Multicast Address
Multicast Port
Times to Play Multicast Message
2.4.7.1 Configure the Security Code Page
1. Click the Edit button to open the Configure Security Code page. See
Operations Guide
Table 2-12. Security Configuration Parameters (continued)
Description
When selected, the device will make a SIP call and play the "blacklist" audio
file when a blacklisted code is entered.
The extension that will be dialed if "Play Mesage to SIP Extension" is selected
above. Enter up to 64 alphanumeric characters.
Additional caller identification string added to outbound calls. Enter up to 64
alphanumeric characters.
When selected, the device will multicast the "blacklist" audio file to the
specified address and port.
The multicast address that the "blacklist" audiofile will be played to.
The multicast port that the "blacklist" audofile will be played to.
The number of times the "blacklist" audio file will be played via multicast. Enter
a value between 1 and 65535.
Click the Save button to save your configuration settings.
Click on the Reboot button to reboot the system.
Click on the Export Security Settings button to export the current security list
to a file.
Click on the Toggle Help button to see a short description of some of the web
page items. First click on the Toggle Help button, and you will see a question
mark (
pointer to hover over a question mark to see a short description of a specific
web page item.
Figure 2-22. Configure Security Code Page
931562B
Installing the SIP Outdoor Intercom with Keypad
) appear next to some of the web page items. Move the mouse
Intercom Setup
Figure 2-22.
CyberData Corporation
43