CyberData 011214 Operation Manual page 30

2.3.6.1 Announcing the IP Address
To announce a device's current IP address:
1. Press and release the RTFM button (see SW1 in
Note
Note
Operations Guide
The device will use DHCP to obtain the new IP address (DHCP-assigned address or default
to 10.10.10.10 if a DHCP server is not present).
Pressing and holding the RTFM button for longer than five seconds will restore the device to
the factory default settings.
931562B
Installing the SIP Outdoor Intercom with Keypad
Figure 2-13) within a five second window.
Figure 2-13. RTFM Button
Intercom Setup
RTFM button (SW1)
CyberData Corporation
23