Radiator Reserve Tank Removal/Installation - Honda PCX150 2013 Service Manual

Be careful not to
Remove the four radiator mounting bolts [1] and
damage the fins
radiator [2].
while servicing the
Installation is in the reverse order of removal.
radiator.
Make sure that the
Fill and bleed the cooling system (page 9-5).
hose clips are
After installation, make sure the coolant does not leak.
installed in the
correct direction
(page 1-25).
REMOVAL/INSTALLATION ('13
MODEL)
Remove the luggage box (page 2-25).
Disconnect the overflow hose [1] from the reserve tank
[2].
Remove the special bolt [3].
Remove the reserve tank [1] by releasing the boss [2]
from the groove [3] of the rear fender.
Open the reserve tank cap [4] and drain the coolant into
an approved pan.
Disconnect the siphon hose [5] from the reserve tank.
Installation is in the reverse order of removal.
• After installation, fill the reserve tank with the coolant
(page 9-6).
REMOVAL/INSTALLATION (AFTER '13
MODEL)
Remove the right side cover (page 2-8).
Disconnect the siphon hose [1] from the reserve tank [2]
and drain the reserve coolant.
Remove the bolt [3] and reserve tank.
Installation is in the reverse order of removal.
• After installation, fill the reserve tank with the coolant
(page 9-6).