Meter Visor Removal/Installation - Honda PCX150 2013 Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
REMOVAL/INSTALLATION (AFTER '13
MODEL)
Remove the two screws [1].
Release the snap fit clips [2].
Pull the front grille [3] forward and release the hooks [4],
then remove the front grille.
Installation is in the reverse order of removal.
METER VISOR
REMOVAL/INSTALLATION ('13
MODEL)
2-6
Remove the front grille (page 2-5).
Remove the four bolts/washers [1], plastic washers [2]
and meter visor [3].
Installation is in the reverse order of removal.
REMOVAL/INSTALLATION (AFTER '13
MODEL)
Remove the front grille (page 2-5).
Remove the four bolts [1]/four plastic washers [2] and
meter visor [3].
Installation is in the reverse order of removal.
[3]
[2] [1]