Table of Contents
Advertisement
LIGHTS/METERS/SWITCHES
2. Fuel Pulse Line Short Circuit Inspection
Check the continuity between the combination
meter 16 P connector [1] of the wire harness side.
CONNECTION: Pink - Ground
Is there continuity?
YES
- Short circuit in the Pink wire
NO
- Faulty ECM
VS SENSOR
REMOVAL/INSTALLATION
21-16
Remove the air cleaner housing (page 7-13 ).
Remove the two socket bolts [1] from the sensor
protector [2].
Remove the sensor protector while releasing the
grommet [3] of the protector from the boss [4] of the left
crankcase.
Release the wire band bosses [5] from the sensor
protector.
• When installing the socket bolt, clean the threads
and apply locking agent to the bolt threads.
TORQUE: VS sensor protector socket bolt:
10 N·m (1.0 kgf·m, 7 lbMt)
Disconnect the VS sensor 3P (Black) connector [1].
Remove the bolt [2] and VS sensor [3].
Remove the 0-ring [4] from the VS sensor groove.
Installation is in the reverse order of removal.
• Replace the 0-ring with a new one and coat it with
engine oil.
[1]
Pink
Advertisement
Table of Contents
Troubleshooting
