Under Cover Removal/Installation - Honda PCX150 2013 Service Manual

FRAME/BODY PANELS/EXHAUST
REMOVAL/INSTALLATION ('13
MODEL)
Remove the side covers (page 2-8).
Remove the four bolts/washers [1] and trim clip [2].
Release the three hoses [3] from the under cover [4] as
shown.
Remove the under cover from the tabs [5] of the front
lower cover.
Installation is in the reverse order of removal.
REMOVAL/INSTALLATION '13
MODEL)
Remove the side covers (page 2-8).
Remove the four bolts/washers [1] and trim clip [2]. [6]
Release the battery case drain hose [3] and EVAP
canister drain hose (AC type only) [4] from the under
cover [5].
Remove the under cover from the tabs [6] of the front
lower cover.
Installation is in the reverse order of removal.
[5] [1]