Battery Removal/Installation - Honda PCX150 2013 Service Manual

REMOVAL/INSTALLATION
NOTE:
• Always turn the ignition switch OFF before removing
the battery.
'13 model:
Unlock and open the seat.
Remove the trim clip [1].
Remove the battery maintenance lid [2] from the
luggage box.
After '13 model:
Unlock and open the seat.
Press the tabs [1] and remove the battery maintenance
lid [2].
Release the battery band [1].
Remove the bolt [2] and disconnect the negative (-)
cable [3].
Remove the bolt [4] and disconnect the positive (+)
cable [5].
Remove the battery [6].
Connect the
Install the battery in the reverse order of removal.
positive terminal
first and then the
negative terminal.