HYDRAULIC BRAKE
CBS BRAKE LINE
Remove the inner cover (page 2-13).
Remove the bolt [1] and CBS master cylinder reservoir
[2].
Pull out the CBS master cylinder reservoir as shown.
Remove the reservoir cap [1], diaphragm plate [2] and
diaphragm [3].
Be careful not to
Connect a commercially available brake bleeder [1] to
confuse with the
the CBS brake line bleed valve [2].
front brake line
Loosen the bleed valve and operate the bleeder.
bleed valve.
Drain the brake fluid.
Tighten the CBS brake line bleed valve.
19-6
[2]
~ ( 3 ]
~