Table of Contents
Advertisement
Apply grease (Shell RETINEX LX2 or NIPPON OIL P/U
N6B or equivalent) to a new needle bearing [1].
Set the needle bearing with its sealed side facing up.
Press the needle bearing into the driven face until it is
flush with the driven face surface as shown.
TOOLS:
[2] Driver
[3] Attachment, 28 x 30
mm
[4]
Pilot, 20
mm
ASSEMBLY
SEAL COLLAR
DRIVEN PULLEY
077 49-0010000
07946-1870100
077 46-0040500
Apply engine oil to new oil seal [1] lips and install them
into the movable driven face.
Apply engine oil to new 0-rings [2] and install them into
the movable driven face grooves.
DRIVEN FACE
MOVABLE DRIVEN FACE
CLUTCH SHOES
~
S
[1]
PLATE
[2]
1
Advertisement
Table of Contents
Troubleshooting
