Piston Installation - Honda PCX150 2013 Service Manual

INSTALLATION
Apply engine oil to the rings and ring grooves [1].
Carefully install the piston rings into the piston ring
grooves with the markings [2] facing up.
NOTE:
• Do not confuse the top ring [3] and second ring [4].
• To install the oil ring, install the spacer [5] first, then
install the side rails [6]. ·
Stagger the piston ring end gaps 120 ° apart from each
other.
Stagger the side rail end gaps as shown.
Apply engine oil to the connecting rod [1] small end
inner surface.
Apply engine oil to the piston pin [1] outer surface and
piston pin hole inner surface.
Install the piston [2] with the "IN" mark [3] facing the
intake side.
Install the piston pin.
CYLINDER/PISTON
[3]
-{c:t
11