11. Click OK.
12. To view the settings, select File > New Multi-Function.
The settings are displayed.
Saving current settings
Save your settings once you have them configured.
1. Make any adjustments required for warping, edge blending, or black leveling, or modify the
general settings.
2. From the File menu, select Save.
Opening previously saved settings
After starting a new session, instead of creating new warping, edge blending, or black leveling
settings, you can open the previously saved settings.
From the File menu, select Open.
Applying previously saved settings
If you modified the general settings or made adjustments for warping, edge blending, or black
leveling, you can revert to the previously saved settings.
1. From the File menu, select Open.
2. Switch to the General tab.
3. In the Network section, enter the required IP address.
4. Click Connect.
5. To apply the previous settings, click Synchronize.
H Series, HS Series, GS Series (700, 850) Warping and Blending User Manual
020-000807-02 Rev. 1 (07-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Warping and blending
11