Encore Composer; Error Log; Copy Configuration; User Options - GE Medical Systems PRODIGY Service Manual

3.1.8 enCORE Composer

3.1.9 Error Log

3.1.10 Copy Configuration

3.1.11 User Options

3.1.12 Service Options

3.1.13 Outbox

3.1.14 System File Editor

3.2

Tools / Diagnostics Menu

3.2.1 Pileup

3.2.2 Calibration Pileup

3.2.3 Spillover

3.2.4 Count Rate

3.2.5 Scanner Motion

This document contains confidential or proprietary information of GE-Lunar Corp. Neither the document nor the information therein is
to be reproduced, distributed, used or disclosed, either in whole or in part, except as specifically authorized by GE-Lunar Corp.
PRODIGY Service Manual (Rev C - 2000)
Download and verify the Firmware versions for the (c)SBC.
This is not a service tool - (Physical and Business Report Generator - see the
enCORE Operator's Manual for information).
Ability to view and print the contents of the diagnostic error log (see section
3.4)
Ability to copy the scanners Error log, Configuration Files and / or QA
Database to a drive on the host PC - useful when a host PC is replaced or
when diagnostic information needs to be sent to GE-LUNAR.
Set up user configured options for the scanner.
Service Mode scanner configurations (see section 3.5).
Configure Printing, E-mail and Faxing options.
Edit system settings for the enCORE software - do not alter these settings
without GE-LUNAR Customer Support authorization.
Determines Detector parameters for multiple events occurring simultaneously
- not used for service.
Not used for service.
Perform and Acquire a Spillover Measurement (test of source spectrum and/
or detector resolution).
Acquire and print Reference Counts (count rate of detector must be
performed through lucite).
Service Software3-105