Options; To View Currently Installed Options; Re-Installing Options - Keysight Technologies FieldFox N9913A Service Manual

General Purpose Maintenance and Service Procedures

Options

Options
Installed options determine the functionality of the analyzer. There is a license
associated with each option.

To View Currently Installed Options

— Press System(7).
— Press System Configuration.
— Press Options.
— Press Show Options.
A list of the currently installed options is displayed.

Re-Installing Options

If an instrument looses all of its options (i.e. it reports or "shows" no options),
the only functionality available will be the base mode for the model.
When the A6 SOM board is replaced, it is necessary to re-load the license files
because the license and option information is stored on the A6 SOM board.
Process for obtaining and re-installing options:
1. Send an email to ctd-soco_support@keysight.com with the following
2. Within two working days, you will receive an email response with a license
3. Copy the license file to the root of a USB flash drive. Follow the
172
information.
— Indicate that you need previously issued licensed for a FieldFox
repair.
— Model number and serial number of the instrument.
— Maximum frequency of the instrument from the label above the
display.
— A list of options from the serial number label on the back of the
instrument.
— A brief description of why options need to be re-installed. This
information will help Keysight identify recurring problems that may
need special attention.
file attached.
appropriate instructions in the N9912A Upgrade Installation Instructions
(N9912-90005) to install the licenses. These instructions are available by
searching for "N9912-90005" on the Web at www.keysight.com.
Keysight FieldFox Handheld Analyzers Service Guide