Regulatory Information; Instrument Markings - Keysight Technologies FieldFox N9913A Service Manual

Safety and Regulatory Information

Regulatory Information

Regulatory Information
This section contains information that is required by various government
regulatory agencies.

Instrument Markings

The instruction documentation symbol. The product is marked with this symbol when it is
necessary for the user to refer to the instructions in the documentation.
The CE mark is a registered trademark of the European Community. (If accompanied by a year, it
is when the design was proven.)
The CSA mark is a registered trademark of the Canadian Standards Association.
This is a marking to indicate product compliance with the Canadian Interference-Causing
ICES/NMB-001
Equipment Standard (ICES-001).
This is a symbol of an Industrial Scientific and Medical Group 1 Class A product.
This is a required mark signifying compliance with an EMC requirement. The C-Tick mark is a
registered trademark of the Australian Spectrum Management Agency.
This product complies with the WEEE Directive (2002/96/EC) marking requirements. The
affixed label indicates that you must not discard this electrical/ electronic product in domestic
household waste.
Prod uct Category: With reference to the equipment types in the WEEE
Directive Annex I, this prod uct is classed as a "Monitoring and Control
instrumentation" prod uct.
Do not d ispose in domestic household waste.
To return unwanted prod ucts, contact your local Keysight office, or see
http://about.keysight.com/en/companyinfo/environment/
information.
14 Keysight FieldFox Handheld Analyzers Service Guide
for more