Keysight Technologies FieldFox N9913A Service Manual page 113

Repair and Replacement Procedures
Removing and Replacing the Case Group Parts
2. To replace the entire kickstand assembly:
3. To replace the hinge cover:
Keysight FieldFox Handheld Analyzers Service Guide
a. Lift the kickstand assembly off of the rear case and discard it.
b. Place the new kickstand assembly on the rear case.
c. Place the new hinge cover in position and secure it with four new
screws. A new hinge cover and new screws are provided in the
Repair and Re-assembly
a. Position the new hinge cover in place and install four new screws.
New screws are provided in the
Kit.
Repair and Re-assembly Kit.
113