Keysight Technologies FieldFox N9913A Service Manual page 114

Repair and Replacement Procedures
Removing and Replacing the Case Group Parts
4. To replace the hinge:
Figure 7-3 Replacing the Hinge
114
a. Refer to Figure 7-3. Lift the kickstand assembly off of the rear case.
b. Remove and discard the four hinge attachment screws (2).
c. Place the new hinge in position and install with four new screws.
New screws are provided in the
d. Place the kickstand assembly in place on the rear case and reinstall
the hinge cover with new screws provided in the
Re-assembly Kit.
Repair and Re-assembly
Keysight FieldFox Handheld Analyzers Service Guide
Kit.
Repair and