Keysight Technologies FieldFox N9913A Service Manual page 129

Repair and Replacement Procedures
Removing and Replacing the Case Group Parts
Figure 7-17 Combining the Front and Rear Cases (N995xA, N996xA)
13.For N995xA and N996xA models only. Refer to
14.Reinstall the battery. Refer to
Keysight FieldFox Handheld Analyzers Service Guide
rings onto the RF connectors. Using a 1.5 mm Allen torque screwdriver,
tighten the 3 Allen screws on each nut ring. Torque to 24 ozf-in.
on page 109.
Figure
"Removing and Replacing the Main Battery"
7-4. Place the nut
129