Keysight Technologies FieldFox N9913A Service Manual page 104

Replaceable Parts
Replaceable Parts Listings
Description
T-8 TORX driver; set to 6 in-lb
T-10 TORX driver; set to 9 in-lb
5/16 inch, open-end torque wrench; set to 10 in-lb
7/16 inch, hex nut wrench or "nut driver"; set to 9 in-lb
9/16 inch, open-end torque wrench; set to 21 in-lb
5/8 inch, open-end torque wrench; 3.95 N-m (35 lbf-in)
5/8 inch, open-end torque wrench; 113 N-m (16 ozf-in)
5/16 inch, flare deep socket torque screwdriver; 1.13 N-m (10 lbf-in)
Tool - hand nut starter
Users' Guide. Can also be printed from the Keysight Web site.
Quick Reference Guide
Service Guide. (Not available in printed form. Part number is for reference only. Must be printed
from the Keysight Web site.
Adjustable antistatic wrist strap
Antistatic wrist strap grounding cord (5 foot length)
Static control table mat and earth ground wire
ESD heel strap
Battery- Rechargeable Li Ion 11.1V 4.6A-HR
1. Refer to "Battery Disposal" on page 15
104
Tools and Wrenches for N995xA and N996xA Repair
Documentation
ESD Supplies
Battery
for instructions on disposing of the old battery.
1
Keysight FieldFox Handheld Analyzers Service Guide
Model or Part
Number
N/A
N/A
N/A
N/A
N/A
8710-2792
8710-2793
8710-2794
8710-2795
N9927-90001
N9927-90002
N9927-90003
9300-1367
9300-0980
9300-0797
9300-1126
1420-0908