Partitioning Data Media; Partitioning In Windows Embedded Standard 7; Partitioning In Windows 7 Ultimate - Siemens SIMATIC IPC477D Operating Instructions Manual

7.5.2

Partitioning data media

7.5.2.1

Partitioning in Windows Embedded Standard 7

You will need to reconfigure the partitions after installing a new drive, to repair corrupt
partitions or to change the partitioning.
Partitioning of the SIMATIC IPC CFast card
The SIMATIC IPC CFast card for Windows Embedded Standard 7 comes configured with
the following default partitions:
Partition
1st Partition
2nd Partition
* Due to partitioning/formatting, the actual CFast capacity does not correspond to the
memory size specified on the SIMATIC IPC CFast card.
Partitioning of the HDD or SSD
In the delivery state, the following partitions are configured on the HDD or SSD drive with the
Windows Embedded Standard 7 operating system:
Partition
Primary
Second
To restore the partitions to their original delivery state, we recommend you use the software
SIMATIC IPC Image & Partition Creator. Additional information is available in the
accompanying documentation.
7.5.2.2

Partitioning in Windows 7 Ultimate

You will need to reconfigure the partitions after installing a new drive, to repair corrupt
partitions or to change the partitioning.
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD
Name Size of the card
8 GB
SYSTEM 7 GB
DATA Remainder
Name Size of data medium
>64 GB
System 50 GB
Data Remainder
Maintaining and servicing your device
16 GB
12 GB
Remainder
File system
>100 GB
100 GB NTFS not compressed
Remainder NTFS not compressed
7.5 Installing the software
File system
NTFS (compressed)
NTFS (compressed)
127