Front Panel Management Port Rj45; Table 3-4: Front Rj45 Ethernet Connector - Kontron CP6924-1 User Manual

Table 3-3:
SFP Uplink Port Pinout
PIN Signal
15 3.3V RX
16 3.3V TX
17 GND
18 TD+
19 TD-
20 GND
1) MODDEF2 is used as SFP+ SDA signal
MODDEF1 is used as SFP+ SCL signal
MODDEF0 is used as SFP+ PRESENT signal
PIN9, GND is used as RATE2_SELECT
3.4.5

Front Panel Management Port RJ45

The standard RJ45 has the following Pin Assignment.
Table 3-4:
Front RJ45 Ethernet Connector
Contact MDI
1.1 BI_DA+
1.2 BI_DA–
1.3 BI_DB+
1.4 BI_DC+
1.5 BI_DC–
1.6 BI_DB–
1.7 BI_DD+
1.8 BI_DD–
32
Contact MDI
2.1 BI_DA+
2.2 BI_DA–
2.3 BI_DB+
2.4 BI_DC+
2.5 BI_DC–
2.6 BI_DB–
2.7 BI_DD+
2.8 BI_DD–
Contact MDI
3.1 BI_DA+
3.2 BI_DA–
3.3 BI_DB+
3.4 BI_DC+
3.5 BI_DC–
3.6 BI_DB–
3.7 BI_DD+
3.8 BI_DD–
CP6924-1 User Guide
Contact MDI
4.1 BI_DA+
4.2 BI_DA–
4.3 BI_DB+
4.4 BI_DC+
4.5 BI_DC–
4.6 BI_DB–
4.7 BI_DD+
4.8 BI_DD–
www.kontron.com