Board Interfaces; Front Panel Elements; Front Panel Switches; Figure 3-2: Front Panel Of The Cp6924-1-Ra-Oc - Kontron CP6924-1 User Manual

3.4

Board Interfaces

3.4.1

Front Panel Elements

3.4.1.1 CP6924-1-RA-OC and CP6924-1-SA-OC-V Front Panel
The Front Panel has the following features:
•
Two SFP+ connector cages (CP6924-1-RA-OC)
•
Two SFP connector cages (CP6924-1-SA-OC-V)
•
Four 10/100/1000Base-T for Management (RJ45 connector)
•
One RS232 for Management (RJ45 connector)
•
One Management Port LED
•
Status LEDs
•
Hot swap LED
Figure 3-2: Front Panel of the CP6924-1-RA-OC
Figure 3-3: Front Panel of the CP6924-1-SA-OC-V
3.4.1.2 CP6924-1-RC Front Panel
The CP6924-1-RC does not have a front panel.
3.4.2

Front Panel Switches

The Handle Switch is actuated with the lower ejector handle of the board. It is used to signal the inserting or impending
extraction of the board.
A reset switch is provided being activated with an adequate tool (e.g. pencil). When the switch is pressed, the board per-
forms a power cycle to all payload devices and resets the PM.
29
CP6924-1 User Guide
www.kontron.com