Proprietary Note; Trademarks; Environmental Protection Statement; Advisory Conventions - Kontron CP6924-1 User Manual

Proprietary Note

This document contains information proprietary to Kontron. It may not be copied or transmitted by any means, disclosed to
others, or stored in any retrieval system or media without the prior written consent of Kontron AG or one of its authorized
agents.
The information contained in this document is, to the best of our knowledge, entirely correct. However, Kontron AG cannot
accept liability for any inaccuracies or the consequences thereof, or for any liability arising from the use or application of
any circuit, product, or example shown in this document.
Kontron AG reserves the right to change, modify, or improve this document or the product described herein, as seen fit by
Kontron AG without further notice.

Trademarks

Kontron AG and the Kontron logo are trade marks owned by Kontron AG, Germany. In addition, this document may include
names, company logos and trademarks, which are registered trademarks and, therefore, proprietary to their respective
owners.

Environmental Protection Statement

This product has been manufactured to satisfy environmental protection requirements where possible. Many of the compo-
nents used (structural parts, printed circuit boards, connectors, batteries, etc.) are capable of being recycled.
Final disposition of this product after its service life must be accomplished in accordance with applicable country, state, or
local laws or regulations.

Advisory Conventions

This symbol and title indicate potential damage and tells you how to avoid
the problem.
Electric Shock
This symbol and title warn of hazards due to electrical shocks (> 60V) when
touching products or parts of them. Failure to observe the precautions indi-
cated and/or prescribed by the law may endanger your life/health and/or
result in damage to your material.
This symbol and title emphasize points which, if not fully understood and
taken into consideration by the reader, may endanger your health and/or
result in damage to your material.
ESD Sensitive Device
This symbol and title inform that electronic systems and their components are sensitive
to static electricity. Therefore, care must be taken during all handling operations and
inspections of this product, in order to ensure product integrity at all times.
Please read also the section "Special Handling and Unpacking Instructions".
8
CAUTION
WARNING
CP6924-1 User Guide
www.kontron.com