Table of Contents
Advertisement
AM5901
1.4.2
Front Panel
Figure 1-2:
AM5901 Front Panel
A
B
SFP/Lnk
A
B
12
A
B
C
D
AM5901
ID 1032-0648, Rev. 1.0
Module LEDs
LED1 (red):
LED2 (red/green/amber): Health LED
HS LED (blue):
Fabric [A] Link LEDs
FALED12..1 (green):
1..12
User LED
ULED0 (green):
0
Connectors/Switch
7
Serial Connector
6
Ethernet Connector
MCMC Reset Switch
1
Ethernet Status LEDs
0
SFP/Lnk LEDs:
A/B (green):
Uplink RJ-45 Connector LEDs:
ACT (green):
SPEED (green/orange): Ethernet Speed
SPEED ON (orange):
SPEED ON (green):
SPEED OFF:
Management RJ-45 Connector LED:
ACT (green):
Out-of-Service LED
The hot swap indicator provides
basic feedback to the user on the
hot swap state of the module. The
HS LED states are off, short blink,
long blink, and on.
Link signal from the AMC SerDes
ports or the MCMC
Input source for the FALED12..1
(Fabric [A] or MCMC)
Link signal on the SFP interface
Ethernet Link/Activity
1000 Mbit
100 Mbit
10 Mbit
Ethernet Link/Activity
Introduction
Page 1 - 7
Advertisement
Table of Contents
