What To Do If - wtw PurCon IS sample preparation Operating Manual

PurCon IS
Permeate is not being
ba43133e06 05/2009
6

What to do if ...

1 Is the permeate pump turning?
fed
If necessary, check the power supply of the PurCon IS.
If the fault is not remedied, continue with step 2
2 Are the pump tubings properly mounted and
functioning?
Replace pump tubings if necessary.
If the fault is not remedied, continue with step 3
3 Clean the filters according to
UNIT
plates have to be replaced (see chapter 6.1 R
TER PLATES
If the fault is not remedied by thorough cleaning, the filter
).
What to do if ...
5.1 C
SECTION LEANING THE FILTER
EPLACING THE FIL
-
89