Cleaning The Control Unit - wtw PurCon IS sample preparation Operating Manual

PurCon IS
ba43133e06 05/2009
Fig. 5-7 Taking off the air filter
6 Take the air filter off the compressor (pos. 3 in Fig. 5-7).
7 Clean the air filter with neutral soap or replace it.
8 Leave the cleaned or new air filter to dry and insert it again.
9 Screw on the compressor lid again.
10 Tightly close the cover of the compressor with the knurled-
head screws.
11 Tilt the operating panel back again and close it.
12 Insert the mains plug and switch on PurCon IS again at the
mains switch.
13 Close the door to the housing.
5.5

Cleaning the control unit

Wipe the outside of the housing of the PurCon IS control unit with a
damp cloth. If necessary, neutral soap can be used for cleaning.
Maintenance
3
87