Leds; System Leds; Figure 5: Ie210L Series System Leds - Allied Telesis IE210L Series Installation Manual

Chapter 1: Overview

LEDs

System LEDs

26
This section describes the four types of LEDs on IE210L Series switches:
"System LEDs"

"Twisted Pair Port LEDs" on page 28

"SFP LEDs" on page 29

The IE Series switch System LEDs report:
The status of the SD card.

System fault issues.

The status of the AC power to the chassis.

Refer to Figure 5 for a closer view of these LEDs and to "AT-IE210L-10GP
Front Panel" on page 16 and "AT-IE210L-18GP Front Panel" on page 17
for their location on the front panel.
Figure 5. IE210L Series System LEDs
These LEDs report the following information:
The SD card LED (SD) reports the active status of the SC card.

The fault LED (FAULT) indicates a problem with the Fan or chassis

exceeding its maximum temperature.
The power LED (POWER) indicates the ON/OFF status of the AC

Power.