Leds; Installation Options; Power Conservation; Mac Address Table - Allied Telesis IE210L Series Installation Manual

LEDs

Here is a brief description of the port LEDs:
Installation
The switches can be installed in the following ways:
Options
Power
The switches implement Eco-Switch Green Power saving features and
use less power than the METI specification. The switches have the
Conservation
following power conservation features:
MAC Address
Here are the basic features of the MAC address table:
Table
SD card, FAULT and POWER LEDs. Refer to "System LEDs" on

page 26.
Link/Activity/Speed/PoE LEDs for the PoE twisted pair ports. Refer

to "Twisted Pair Port LEDs" on page 28.
Link/Activity LEDs for the SFP slots. Refer to "SFP LEDs" on

page 29.
Rack mounted in a 19-inch equipment rack

Mounted on a desk or tabletop

Wall mounted

High efficiency power supply

Power scaling based on traffic loads on ports operating at

1000Mbps (port power scaling not available at 10 or 100Mbps)
Power shutdown on unused ports

Storage capacity up to 16K MAC address entries

Automatic learning and aging

IE210L Series Industrial Gigabit Ethernet Switch Installation Guide
19