Ie-210L Series Switch Features; Twisted Pair Ports; Sfp Slots - Allied Telesis IE210L Series Installation Manual

Chapter 1: Overview

IE-210L Series Switch Features

Twisted Pair
Ports

SFP Slots

18
This section describes the hardware features of the IE210L Series
Industrial Gigabit Ethernet Switches.
Here are the basic features of the 10/100/1000Mbps twisted-pair ports:
AT-IE210L-10GP, or AT-IE210L-18GP switches: 8 or 16 PoE ports

per switch
10BASE-T (IEEE 802.3i), 100BASE-TX (IEEE 802.3u) and

1000BASE-T (IEEE 802.3ab) compliant
IEEE 802.3u Auto-Negotiation compliant

Auto-MDI/MDIX

PoE Plus

Full wire-speed non-blocking

IEEE 802.3x Flow Control in 10BASE-T/100BASE-TX full-duplex

operation
IEEE 802.3x Back Pressure in 10BASE-T/100BASE-TX

half-duplex operation
IEEE803.3z 1000BASE-T Flow Control

Support for jumbo packets up to 10KB

One RJ45 connector on front panel for RS232 console purposes

Note
For additional information, refer to "Twisted Pair Ports" on page 21.
Here are the basic features of the SFP ports:
AT-IE210L-10GP, or AT-IE210L-18GP switches: 2 SFP ports per

switch
Available for 100Mbps or 1000Mbps of fiber, and 1000Mbps of

copper
Support 100BASE-FX and 1000BASE-SX/LX transceivers

You need to purchase SFP transceivers separately. For a list of supported
transceivers, contact your Allied Telesis distributor or reseller.
Note
See the product data sheets for the specific ATI SFP modules
supported by the IE210L Series switches.