Unpack AT-IE210L-10GP Switch:
To unpack the AT-IE210L-10GP switch, perform the following procedure:
1. Remove all of the components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Verify that the following items illustrated in Figure 8 are included
AT-IE210L-10GP
Switch
Console Port Cable
Power Cable
Power Cable
Retaining Clip
Four Rubber Feet
Figure 8. AT-IE210L-10GP Shipping Package Contents
IE210L Series Industrial Gigabit Ethernet Switch Installation Guide
37