Table of Contents
Advertisement
Twisted Pair Ports
The number of twisted pair ports supported by each IE210L Series switch
is:
8 ports: AT-IE210L-10GP
16 ports: AT-IE210L-18GP
All ports are 10BASE-T, 100BASE-TX, and 1000BASE-T compliant. You
can set the port speeds and duplex modes either automatically with IEEE
802.3u Auto-Negotiation or manually with the management software.
The twisted pair ports feature 8-pin RJ45 connectors. For the port pinouts,
see "Connectors and port pinouts" on page 67.
The ports have a maximum operating distance of 100 m (328 feet).
The ports feature auto-MDI, which automatically configures the ports as
MDI or MDIX. This feature allows you to use straight-through twisted pair
cables regardless of the wiring configurations of the ports on the end
nodes.
Note
A switch port connected to an end node that is not using
Auto-Negotiation should not use Auto-Negotiation to set the speed
and duplex mode, as a duplex mode mismatch may occur. In this
case, disable Auto-Negotiation and set the port's speed and duplex
mode manually.
IE210L Series Industrial Gigabit Ethernet Switch Installation Guide
21
Advertisement
Table of Contents
