Festo MSE6-E2M Mounting, Installation, Commissioning page 5

MSE6-E2M
Notes on this description
This description contains general basic information on the mode of operation, mounting, installation
and commissioning of the energy efficiency module MSE6-E2M.
Further information on commissioning and parameterisation can be found in the system description for
the energy efficiency module (è MSE6-E2M-SY-...).
Special information on commissioning, parameterisation and diagnostics with the bus node you are
using can be found in the corresponding description for the bus node.
Overview of the descriptions è Tab. 1.
Conventions
Chapter 7 describes the parameters and data of the MSE6-E2M. These appear on the operator unit
CPX-MMI-1 in English.
[........] The data and parameters in the text displayed in English on the operator unit are shown in
square brackets in this description, e.g. [Limits]. To the left of this is the translation, e.g.:
Limit values
Service
Consult your local Festo repair service if you have technical problems.
Additional documentation è www.festo.com/sp
User documentation for the MSE6-E2M
Title
"Energy efficiency module"
MSE6-E2M-SY-...
"CPX terminal"
P.BE-CPX-SYS-...
"Bus node"
e.g. P.BE-K-CPX-PNIO-...
"Bus node"
e.g. P.BE-CPX-PNIO-...
"Operator unit"
P.BE-CPX-MMI-1-...
Tab. 1 Descriptions for the MSE6-E2M
Festo – MSE6-E2M-IN-EN – 2017-07c – English
[Limits]
Table of contents
Instructions on commissioning and parameterisation for the
energy efficiency module.
Notes and installation and commissioning of CPX terminals.
Brief descriptions of the bus nodes, e.g. CPX­(M)-FB33/34/35.
Notes on mounting, installation, commissioning and diagnostics
for the bus nodes, e.g. CPX­(M)-FB33/34/35.
Notes on commissioning and diagnostics with the operator unit
CPX-MMI-1.
5