Approach - Festo MSE6-E2M Mounting, Installation, Commissioning

4 Commissioning
4.1

Approach

In order to avoid connecting and addressing errors, you should carry out commissioning in steps as
follows. The individual commissioning steps are shown in the diagram below.
1
Step 1 – Checking of the connected pneumatic application
2
Step 2 – Commissioning on the fieldbus with testing of the address allocation
Fig. 4.1 Commissioning steps (example at the bus node CPX-FB33)
26 Festo – MSE6-E2M-IN-EN – 2017-07c – English
1
2