Parameter Listing - WEG CFW-10 EASYDRIVE User Manual

CHAPTER 6 - DETAILED PARAMETER DESCRIPTION
Frequency
Reference
P221
Controls
P229
(run/stop)
Frequency
Reference
P222
Controls
P230
(run/stop)
6.3 PARAMETER
LISTING
54
LOCAL
0 Keypad - HMI
1 AI1
2 EP
3 to 5 Reserved
6 Multispeed
0 Keypad - HMI
1 TerminalsXC1
(DIs)
REMOTE
0 Keypad - HMI
1 AI1
2 EP
3 to 5 Reserved
6 Multispeed
0 Keypad - HMI
1 Terminals XC1
(DIs)
Figure 6.3 - Block diagram of the Local/Remote operation mode
In order to simplify the explanation, the parameters have been
grouped by characteristics and functions:
Read-Only Parameters
Regulation Parameters
Configuration
Parameters
Motor Parameters
Special Function
Parameters
Local/Remote Selection
DI1 to DI4 (P263 to P266)
F*
Variables that can be viewed on
the display, but can not be
changed by the user.
Programmable values that cab be
used by the CFW-10 functions.
They
characteristics, the functions to be
executed, as well as the input/
output functions of the control
board.
Data about the applied motor:
data indicated on the motor
nameplate and those obtained
during the running of the self-tuning
routine.
Here are included parameters
related to special functions.
REFERENCE
COMMANDS
define the inverter