Power Terminals - WEG CFW-10 EASYDRIVE User Manual

3.2.2 Power Terminals

CHAPTER 3 - INSTALLATION AND CONNECTION
Description of the Power Terminals:
L/L1, N/L2 : AC supply line
U, V and W: Motor connection.
PE: grounding connection.
BR: Connection terminal for the braking resistor. Not
available for 1,6A, 2,6A and 4A/200-240V and 1,6A and
2,6A/110-127V models.
+UD: Positive connection terminal (DC Link). This terminal
is used to connect the braking resistor (connect also the
BR terminal). Not available for 1,6A, 2,6A and
4,0A/200-240V and 1,6A and 2,6A/110-127V models.
a) models 1,6A, 2,6A and 4,0A/200-240V and 1,6A and
2,6A/110-127V
b) models 7,3A/200-240V and 4,0A/110-127V
Figura 3.6 - a) and b) CFW-10 Power Terminals
29