Safety Notices; Safety Notices In The Manual; Safety Notice On The Product; Preliminary Recommendations - WEG CFW-10 EASYDRIVE User Manual

1.1 SAFETY NOTICES IN THE
MANUAL
1.2 SAFETY NOTICE ON THE
PRODUCT
1.3 PRELIMINARY
RECOMMEN-
DATIONS
12

SAFETY NOTICES

This manual contains necessary information for the correct
use of the CFW-10 Variable Frequency Drive.
This manual has been written for qualified personnel with
suitable training and technical qualification to operate this type
of equipment.
The following Safety Notices will be used in this manual:
DANGER!
If the recommended Safety Notices are not strictly observed,
it can lead to serious or fatal injuries of personnel and/or
material damage.
ATTENTION!
Failure to observe the recommended Safety Procedures can
lead to material damage.
NOTE!
The content of this manual supplies important information for
the correct understanding of operation and proper performance
of the equipment.
The following symbols may be attached to the product, serving
as Safety Notice:
High Voltages
Components sensitive to electrostatic discharge. Do not
touch them without proper grounding procedures.
Mandatory connection to ground protection (PE)
Shield connection to ground
DANGER!
Only qualified personnel should plan or implement the
installation, start-up, operation and maintenance of this
equipment. Personnel must review entire Manual before
attempting to install, operate or troubleshoot the CFW-10.
These personnel must follow all safety instructions included
in this Manual and/or defined by local regulations.
Failure to comply with these instructions may result in
personnel injury and/or equipment damage.
CHAPTER 1