Keypad (Hmi) Operation; Keypad (Hmi) Description - WEG CFW-10 EASYDRIVE User Manual

5.1 KEYPAD (HMI)
DESCRIPTION
44

KEYPAD (HMI) OPERATION

This chapter describes the CFW-10 operation via Human-
Machine Interface (HMI), providing the following information:
general keypad description (HM)I;
use of the keypad (HMI);
parameter programming;
description of the status indicators.
The standard CFW-10 keypad has a LED display with 3 digits
of 7 segments, 2 status LEDs and 4 keys. Figure 5.1 shows
the front view of the keypad and indicates the position of the
Display and the status LEDs.
LED Display
Figure 5.1 - CFW-10 keypad (HMI)
Functions of the LED Display:
The Led Display shows the fault and status messages (see
Quick Parameter Reference, Fault and Status), the parameter
number and its value.
Functions of the LED´s "Parameter" and "Value":
Inverter indicates the parameter number:
Green Led OFF and red Led ON.
Inverter indicates the parameter content:
Green Led ON and red Led OFF.
Basic Functions of the Keys:
Enables/disables the inverter via acceleration/deceleration
ramp (run/stop). Resets the inverter after a fault trip.
Selects (commutates) the display between parametyer
number/value (position/content).
CHAPTER 5
LED "Parameter"
LED "Value"