Scanning Documents Of Different Types Or Sizes; Scanning Both Sides Of A Document (Fi-6670/Fi-6670A/Fi-6770/Fi-6770A Only); Scanning A Large-Size Document Or Book; (Flatbed Type Only) - Fujitsu FI-6750S Operator's Manual

Chapter 5 Various Documents

5.2 Scanning Documents of Different Types or Sizes

Scanning Both Sides of A Document
(fi-6670/fi-6670A/fi-6770/fi-6770A Only)
1
Load a target document on the ADF Paper Chute.
For how to load documents on the ADF Paper Chute, refer to
Loading Documents on the ADF" (on page
2
Start up ScandAll PRO, and then open the [TWAIN Driver
(32)] dialog box.
For how to open the [TWAIN Driver (32)] dialog box, refer to
3 How to Use ScandAll PRO" (on page 51).
3
Select [ADF (Duplex)] under [Scan Type].
4
Specify a desired paper size from [Paper Size], etc.
5
Click the [OK] button.
⇒
The changes made are applied.
6
From ScandAll PRO, perform a scan.
For how to perform a scan, refer to
PRO" (on page 51).
"2.1
39).
"Chapter
"Chapter 3 How to Use ScandAll

Scanning A Large-Size Document or Book

(Flatbed Type Only)

1
Holding the handle, lift up the Document Cover.
2
Place a target document page on the Document Bed face
down and the top left corner aligned to the reference
point.
3
Start up ScandAll PRO, and then open the [TWAIN Driver
(32)] dialog box.
For how to open the [TWAIN Driver (32)] dialog box, refer to
3 How to Use ScandAll PRO" (on page 51).
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
"Chapter
Glossary
75