Scanning Documents Of Different Types Or Sizes; Scanning Both Sides Of A Document (Fi-6670/Fi-6770 Only); Scanning A Large-Size Document Or Book (Flatbed Type Only); Trouble - Fujitsu fi-6670 Operator's Manual

Chapter 4 Various Documents

4.2 Scanning Documents of Different Types or Sizes

Scanning Both Sides of A Document
(fi-6670/fi-6770 Only)
1
Load a target document on the ADF Paper Chute.
For how to load documents on the ADF Paper Chute, refer to
Loading Documents on the ADF" (on page
2
Start up ScandAll PRO, and then open the [TWAIN Driver
(32)] dialog box.
For how to open the [TWAIN Driver (32)] dialog box, refer to "ScandAll
PRO V2.0 User's Guide".
3
Select [ADF (Duplex)] under [Scan Type].
4
Specify a desired paper size from [Paper Size], etc.
5
Click the [OK] button.
⇒
The changes made are applied.
6
From ScandAll PRO, perform a scan.
For how to perform a scan, refer to "ScandAll PRO V2.0 User's
Guide".
Scanning A Large-Size Document or Book
(Flatbed Type Only)
1
"2.1
39).
2
3
Holding the handle, lift up the Document Cover.
Place a target document page on the Document Bed face
down and the top left corner aligned to the reference
point.
Start up ScandAll PRO, and then open the [TWAIN Driver
(32)] dialog box.
For how to open the [TWAIN Driver (32)] dialog box, refer to "ScandAll
PRO V2.0 User's Guide".
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Consumables

Trouble-

shooting

Operational

Settings

Appendix
Glossary
63