Specifying The Cycle To Replace Consumables [Life Counter Alarm Setting] - Fujitsu FI-800R Operator's Manual

Specifying the Cycle to Replace Consumables [Life Counter Alarm Setting]

Specify the replacement cycle for the consumables.
The background color of the counter for [Pad] or [Pick Rollers] in [Device Setting] changes to light yellow when the
sheet count (after a consumable replacement) reaches 95% of the value specified for this setting and turns yellow
when the sheet count reaches 100%.
You can also display the message for replacing consumables, which is described in
Replacing Consumables (page
1
Start up the Software Operation Panel.
For details, refer to
2
From the list on the left, select [Device Setting 2] → [Life Counter Alarm Setting].
3
Specify a value as the replacement cycle for each of the consumables.
The specifiable value is from 10,000 to 2,550,000 in increments of 10,000.
The factory default setting for [Pick Rollers] is "15".
The factory default setting for [Pad] is "3".
165).
Starting Up the Software Operation Panel (page
Scanner Settings (Software Operation Panel)
144).
167
Messages for Cleaning or