Configuration Modes; Setting Dti050 Configurations - Ametek JOFRA DTI050 A Reference Manual

Sensor Serial
Number
3.2.1

Configuration modes

To enter configuration mode, hold the FUNC (CONFIG) key for 3
seconds. Use the arrow keys to make selections and the
NEXT/HOLD key to proceed to the next configuration display.

3.2.1.1 Setting DTI050 configurations

Setting auto shutdown
Use the arrow keys to set the auto shutdown from 1 to 30 minutes.
Fig. 4
To turn the auto shutdown off, repeatedly press the down arrow until
the display looks as depicted below.
Fig. 5
125821 00
This displays the serial number for
intelligent sensors when they are
connected and recognized.
AUTO SHUTDOWN ON
AUTO SHUTDOWN OFF
31-08-2006
MIN
MIN
15