Dti050 Display - Ametek JOFRA DTI050 A Reference Manual

MAX/MIN Key
3.2

DTI050 display

The main display consists of the following elements depicted below:
Fig. 3
Pos. Name
Primary
Parameters
Units
Type
Display Status
14
This key is used to display the minimum
and maximum value since the function
was entered or the min/max register was
reset. Hold this key for 3 seconds to
reset the min/max register. This key has
a secondary function as a (down arrow)
key when setting configurations.
1
RTD P100(90)385
S/N FIELD HOLD
5
Description
Indicates the type of sensor being
measured.
Indicates the unit of measure for the
display.
Indicates the TC, RTD or Thermistor type
being measured (non-intelligent
sensors).
Indicates the status of the display if it is
not live, eg. HOLD, MIN, MAX etc.
31-08-2006
3
2
4
125821 00